Peg Continuous Feeding Pump , Clinic Enteral Infusion Pump Total Volume 0.1ml～999ml

Easy Operation CE Approved Enteral Feeding Pump With Microcomputer Control Pump

Description:

Enteral Feeding Pump is a transfer device which controlled by microcomputer .It can deliver gastrointestinal nourishment and common intravenous fluds in hospital and family.The advantage is an imitation of gastric motility rhythm. It is suitable for patients who without swallowing ability delivery nourishment to intestines or stomach.The pump with interrupt,required volume and many others alarm function, to ensure delivery safe and reliable.

Working Theory:

Enteral feeding pump consists of shell,control panel,pump cover and peristaltic pump.Through peristaltic pump squeeze pump tubs to reach delivery nourishment.There is a microcomputer in the pump,it can control pump work status,flow rate,required volume and complete alarm,stop pump function.

Main Technique Parameters:

a) Infusion rate:0ml～999ml,≤±10%

b) Total volume:0.1ml～999ml,≤±10%

c) flow rate:1ml/h～300ml/h；

d) Infusion accuracy:At 1ml/h～50ml/h,range:1ml/h,≤±10%；

At 50ml/h～300ml/h,range 5ml/h,≤±10%

e) Power consumption:13VA

f) Size: 193mm×130mm×105mm

g) N.W:1.6kg

h) Feeding tube:Special feeding tube

Working Conditions:

a) Ambient temperature:5℃～40℃；

b) Relative humidity:30％～80％；

c) Barometric:860～1060hPa；

d) Power supply:AC220V,50Hz

e) Battery:Ni-H2 battery group 9.6V,1600mAh

Alarm function:Sound and light alarm as following situations

a) Without any operating when switched on

b) when reach reques volume

c)low battery

d)Feeding tube is in empty,blocked and folding

e) When working loss of AC supply suddenly

Features:
Feeding sets are DEHP-free and latex-free
Safe-T-Valve on feeding sets are designed to protect against runaway feeding if set is improperly loaded or becomes dislodged from pump
Free-Flow Alarm: Stops flow and alerts caregiver to free-flow condition when set is properly loaded
Smart Pump: Dial settings designed to take the guesswork out of pump programming—making operation easy to learn, easy to use, and easy to teach
Programmable Hold: If caregiver desires HOLD for other than 5 minutes for patient care, another interval (1 to 90 minutes) may be selected
Lockout Features: Allows caregiver to temporarily disable SET RATE, SET DOSE, and CLEAR VOLUME dial settings to prevent unauthorized or accidental changes

Important Safety Information
THIS PUMP IS FOR ENTERAL USE ONLY - NOT FOR IV USE
Confirm proper placement and function of patient's enteral feeding tube (nasogastric, jejunostomy, gastrostomy, etc) and verify the following before initiating feeding:
1. Only an t Nutrition Enteral Pump Set is being used
2. Flow rate is set at the prescribed mL/hr
Pump set and container should be replaced as needed, or at least every 24 hours, to avoid fluid-contamination problems.
See Pump Operating Manual for Complete Safety Information and Instructions for Use.