Medical Treble LED X Ray Viewer Light Box , X Ray Illuminator Box 1068*425mm Screen Size

Medical Treble led x ray view boxr with adjustable brightness for radiographic film

Product Description

Product Overview

STATEMED Series LED Film viewer (LED film viewer), adopting contemporary advanced LED solid-state light source and backlight source technology, is the new generation observation device for medical imaging films. As for the viewing screen, not only its brightness but also the uniformity and stability of brightness are high, without any dark spaces and flickers. The light source is characterized by rapid light-emitting, little color temperature attenuation and non- mercury. Therefore, the LED film viewer is of great value that can greatly enhanced the quality of observation device for medical imaging films and ensure the diagnostic quality of medical imaging.

Technology standard

Conform to YY/T 0610-2007 "General Specifications for Illuminators of Medical Image Film"

Normal operating conditions

a) Environmental temperature: +5℃~+35℃;

b) Relative humidity: Not more than 75%;

c) Atmospheric pressure: 75KPa~106KPa;

d) Input voltage: AC220V±10%, Frequency: 50/60Hz;

e) The equipment should be well earthed and the earth resistance should be not more than 0.1Ω.

Environmental conditions of storage and transportation

a) Environmental temperature: -40℃~+55℃;

b) Relative humidity: Not more than 93%;

c) Atmospheric pressure: 50KPa~106KPa;

e) Ventilated room without corrosive gas, and dust.

Detailed Information

Functions of LED Film viewer

Function of brightness: Brightness adjustment shall be continuous and uniform without flickers.

Function of inserts control: There is an insert controller inside the LED Film viewer, the film viewer will become bright when insert the film and will be dark when remove the film.

Optical parameters

1) Fixed brightness type: the max brightness ≥ 4000cd/m2, or ≥ 6000 cd/m2.

Adjustable brightness type:the max brightness ≥ 4000cd/m2, or ≥ 6000 cd/m2; and the min brightness ≤ 300cd/m2;

2) Brightness uniformity of viewing screen ≥ 0.8;

3) Color temperature of light source > 6500K;

4) Brightness stability of viewing screen ≤ 2%;

5) Scattering coefficient of viewing screen > 0.9;

6) Starting time and flickers

a) Once switch it on, the film viewer will become bright and reach the rated brightness within 1 second.

b) No flickers.

Working principles

Main parts of equipment: LED light source, light guide plate, reflecting film, viewing screen, switching mode power supply, and film clip.

The power supply of LED light source can be got though converting AC220V to DC24V by switching mode power supply.

After refracting by light guide plate and reflecting by reflecting film many times, the strong light with high color temperature emitting from the LED light source, enables the uniform, soft and white light appear on the viewing screen for film observation.

The film clip ensures that films can be conveniently and firmly inserted on the viewing screen, also be removed easily.

Use method

First, close the power switch on the plate; second, plug one end of the power plug into the socket which is in gap position on the side of LED Film viewer; lastly, plug the other end into three-core power socket of AC; then AC will be connect to this equipment.

First, open the power switch on the plate, then observe the uniform and white light appearing on the screen; and the brightness of viewing screen will be stable one second later.

Hold the bottom of the film and insert the top part into film clip along the surface of LED Film viewer. The film will be on the surface of screen after you loosening hands, and then you can observe the film.

Hold the bottom of the film then pull down it gently to remove it from film clip.

If not use for long time, please close the power switch or unplug it from the AC power socket.

For LED Film viewer with luminance adjustment, the light source service life may be shortened if in max brightness state for long time.

For LED Film viewer with inserts control, the screen will became bright when inserts the films and become dark when remove it.

Without waterproof function, this equipment is only suitable for observing dry films. Wet films must be dried before inserting it into screen; if not, equipment faults or personal injury may happen.

Packing

Payment and Delivery

T/T, LC, etc

Why Choose Us ?

1. Low MOQ, we can accept 1 piece orders

2. TOP PERFECT QUALITY

3. REASONABLE PRICE

4. FAST DELIVERY

5. EXCELLENT SERCIVE AFTER SERCIVE

6. 10+ EXPERIENCE ON INTERNATIONAL TRADE BUSINESS