State (Beijing) Medical Technology Co., Ltd.
State (Beijing) Medical Technology Co., Ltd.
Add to Cart
Cheap price Portable Multi Parameter Patient Monitor with CE
Product description
STT-601B Multi-Parameter Patient Monitor uses RF energy only for its internal function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment. It is used in many kind of wards of hospital, such as ICU, CHD room, neonate room, operation room and so on, in order to supply patient information in time. It is made up of mainframe, display, ECG leads wire, BP cuff, SPO2 sensor and temperature sensor. With 12.1 inch high-resolution display of ECG waveforms, respiratory waveform and blood oxygen pulse pressure volume diagram and the picture is more clearer.
RESP
| Measurement range | adult 7～120 bpm pediatric /neonate 7～150 bpm |
| precision | ±2bpm |
| impedance test range | 0.3～3Ω |
| base line impedance range | 200～4000Ω(50～120kHz pump-frequency) |
| apnea alarm time | 10～40s |
| alarm range | 0～121bpm, up and down limit can be adjusted continuously |
| alarm indicator | Audial and visual alarm |
TEMP
| Measurement range | 0℃～50.0℃ |
| precision | ±0.1℃ |
| unit | centi degree (℃) ,degree Fahrenheit(℉) |
| channel | Two channel |
| alarm range | 0.0～50.0℃.up and down limit can be adjusted continuously |
| Alarm indicator | Audial and visual alarm |
PRINTER
| Method | Thermal dot-matrixix |
| Printer paper width | 50mm |
| specification | Length 20m/roll |
| Printing detail | Waveform, text |
| trace | Two channel |
| speet | 25mm/s |
Power
| Supply power | AC 220V±10% 50/60Hz±2% |
| power | 80VA |
| Fuse specifications and models, rating | Ｔ2.5AL/250V Φ5×20 |
| Display mode | LCD display |
| Alarm mode | Audible and visual |
| Network connection | Can be expanded |
